Vehicles
185 not categorized PORSCHE 924 SIDE LIGHTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.91461354102 Easily installed on the side of the transaxle test by removal and insertion of a small pick. if the reverse lights operate (make sure the key is turned on) then the reverse light pin is worn. View/Change Diagram
From $49.00
Make a selection 100555993RS This is a complete floor carpet kit for coupe models. This set is a lightweight fine German velour that is trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. Drivers side vinyl heel pad and side pads (like original) is also included. Made in Germany. Sold individually.
$1,745.70
Make a selection HEI981001001S Heigo motorsports has been building extremely safe roll cages and roll bars for Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. Chromoly steel 1.5 inch diameter tubing, .098 wall thickness tubing. A true bolt in bar that does not require drilling or welding. Includes a harness bar which is located on the b-pillar hoop. Bars which connect to the main hoop, use a connecting joint system so that you can easily access the motor without the use of tools. Tig welded. Retains full seat adjustability. Factory seat belts or 5-6 point belts can be used. Semi-gloss black finish. The front hoop mounts to the upper bulkhead, in the OEM m...(choose a part on the right to read more)
$1,428.90
Make a selection FVD123038 FVD Brombacher955 Cayenne turbo tt ihi 16/24 ?700 series? Upgraded turbos. General FitmentCAYENNE 2003-06
$4,234.70
Make a selection FVD123041AT FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2007-09
From $2,644.70
Make a selection FVD123042 FVD Brombacher997.1 tt ?700 series? Upgraded turbos General Fitment911 TURBO/GT2 2007-09
$5,860.38
Make a selection FVD123042ATK FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
$2,854.50
Make a selection FVD123047AT FVD Brombacher997.2 tt ?700 series? Upgraded turbos General Fitment911 TURBO/GT2 2007-09
$3,127.00
Make a selection FVD123048 FVD Brombacher997.2 tt "700 series" upgraded turbos facts: - modified compressor housing for the 3.8 l displacement - modified & lightened billet compressor wheel with 12 blades - 49.55 mm inducer - 68 mm exducer - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already running FVD software we start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power), and aids i...(choose a part on the right to read more)
$6,413.00
Make a selection FVD211342 This heater blower bypass tube was originally used on the rennsport and cup models to save weight. It is made of lightweight, polished carbon / kevlar. Please note: for the 993's from 1996+ you must also purchase and additional air duct, part # 96410640302 looking to add more carbon to your engine bay, take a look at our carbon air duct for the intake, part # FVD211343 sold individually. 1 necessary per car. Installation note: this tube snaps inside part # 96410640302. If 96410640302 is very old and has lost its elasticity then fitment can be an issue. We recommend adding qty. 1 of part # 96410640302 in this instance.
$350.90
Make a selection FVD33396401 A cost-effective combination of bilstein b6 shocks with a set of German h&r lowering springs. This kit is a perfect balance of performance and comfort for street use. Benefits: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Slightly lower stance at 1.3 inches (35 mm) front / 1.18 inches (30 mm) rear. Marked improvement in safety and sportiness. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Please note: if you would like to reduce the ride height, please order part # 115110016 which will lower the stance by another 1.5 inches (40mm).
$2,538.55
Make a selection FVD424041 Ok, we know you are a driving enthusiast if you are shopping for a short shifter for your manual transmission. Driving enthusiasts appreciate a more direct connection to the car, transmission and road surface. If you are trying to clean up those long shifts and side to side play on the factory shifter you are certainly on the right track with this upgrade. This numeric racing short shift kit uses precision ball bearings on all axis' which produce 35% shorter throws with an almost gated like action. Short gated like throws increase your driving experience by enhancing a more direct, mechanical connection to your car. Once installed you will find joy with every shift and this will easily become one of your favor...(choose a part on the right to read more)
$808.50
Make a selection FVD424051 The perfect complement for a numeric racing short shift upgrade or a factory cable replacement. These numeric racing cables are motorsports quality that enhance the driving experience by providing a direct, mechanical connection to your car. They provide precision gear engagement that works seamlessly with the numeric racing short shift upgrade. Features: larger diameter steel spiral wound cable direct connection to each shift greater reliability precise engagement pre-lubricated for smooth operation billet aluminum and stainless-steel connectors eliminates excessive cable backlash for longevity billet aluminum rod ends thermo plastic jacket warranty included please note: professional installation is recommende...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2001-05911 TURBO/GT2 2007-09 911 1998-05 911 2005-08 911 2009-12 911 GT3 2007-11
$504.90
Make a selection FVD503930003 Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) rear quarter panel kit with vents. These fenders are complete from the engine decklid to the door. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight left and right side. - made of high strength, grp (glass-reinforced plastic) sold as a kit. 1 necessary per car. Please note: this works in conjunction with widebody / rsr front fender set, part # FVD503930001 and rear bumper, part # 10050305503gfk . Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 1...(choose a part on the right to read more) General Fitment911 1970-73
From $1,809.50
Make a selection FVD424054 The perfect complement for a numeric racing short shift upgrade or a factory cable replacement. These numeric racing cables are motorsports quality that enhance the driving experience by providing a direct, mechanical connection to your car. They provide precision gear engagement that works seamlessly with the numeric racing short shift upgrade. Features: larger diameter steel spiral wound cable direct connection to each shift greater reliability precise engagement pre-lubricated for smooth operation billet aluminum and stainless-steel connectors eliminates excessive cable backlash for longevity billet aluminum rod ends thermo plastic jacket warranty included please note: professional installation is recommende...(choose a part on the right to read more)
$527.99
Make a selection FVD504399 Complete set of 4 fender flares to make your narrow body look like a factory GT2 / rsr. Made in europe by one of the manufacturers to Porsche. Extremely high-quality glass reinforced plastic (grp) that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 11 lbs. (5.0 kg). - made of high strength, glass reinforced plastic (grp). - made in Germany. To complete the look, please order the fender flare installation kit separately, part # FVD504399a and the correct set of side skirts is part # FVD504396. The correct wheel sizes are: front: 10x18 bbs-magnesium/aluminum starred - 235/40-zr18 rear: 12x18 bbs-magnesium/aluminum...(choose a part on the right to read more) General Fitment911 1994-98
From $2,246.90
Make a selection HEI60000102S Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have some cosmetic inconsistency's (light scratches, etc.). For a perfect show car look, we suggest ordering the bar painted or powder coated. General Fitment911 1970-73
From $300.17
Make a selection FVD512964008RS Made in europe by one of the manufacturers to Porsche. Extremely high-quality glass fiber komposite (gfk) rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight - glass fiber komposite (gfk) - mounting is just like factory, no modifications are necessary. - fits all 964 narrow body models - left and right side exits for exhaust please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. If you do not have the rs license plate light please also order 91163162004 General Fitment911 1989-94
From $1,306.37
Make a selection FVD631403SW Update or complete the look of your car with a set of more sinister smoked / blacked out front turn signal lenses. These replace the original amber lens, part # 91163191400 quality tuning product manufactured by dansk. They offer a complete line of tuning and performance parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. The red / smoked rear taillight lenses complete the smoked look, they are part # 91163195100eq and 91163195200eq . Sold as a set. Passenger's and driver's s...(choose a part on the right to read more) General Fitment911 1970-73
$146.16
Make a selection FVD63199701 Led tail lights with integrated brake, fog, reverse and indicator light General Fitment911 GT3 2007-11911 TURBO/GT2 2007-09 911 2005-08
$822.80
Make a selection FVD99661801 From the factory, Porsches turbo models come with a bulky, restrictive cast intake air distributor plenum and inadequate diameter piping to the intake side of the turbochargers. This piping also causes a difference in boost pressure of up to .3 bar between the left and right side turbos and is not suited for higher horsepower applications. General Fitment911 TURBO/GT2 2001-05BOXSTER 2005-08
$1,094.50
Make a selection GT021 This is a duplicate of the original "long" hood. It comes complete with the mounting hardware for the original hood hinges and the correct mounting point to use the original hood latch. This hood is also backed up with the original inside bracing. These hoods are made from a multi-composite construction making them very light and strong. Average 13 lbs (original weight 42 lbs). General Fitment911 1965-69911 1970-73
$750.00
Make a selection GT030 Porsche 911 "driver side" stock narrow body complete front fender with the headlight bucket, closing / vertical mounting flange and the gas bucket for stock builds or retaining original gas filler. This GT racing front Porsche 911 fender fits stock 911 front bumpers or GT racing part #43 and #43d. average weight 8 lbs. original part weight approximately 28 lbs. Each side. General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89
$550.00
Make a selection FVD123048ATK FVD Brombacher997.2 tt "700 series" upgraded turbos facts: - modified compressor housing for the 3.8 l displacement - modified & lightened billet compressor wheel with 12 blades - 49.55 mm inducer - 68 mm exducer - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already running FVD software we start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power), and aids i...(choose a part on the right to read more)
$2,634.50
Make a selection HEI600063 With dmsb license for all 45 mm roll bars for installation in existing bars and cages from heigo (as well as all other manufacturers) 1. To be used with all active rollover protection with a dmsb- or ons certificate from heigo 2. To be used with all active rollover protection with a dmsb- or ons certificate from matter gmbh (graben-neudorf) 3. To be used in so called self constructed devices as decribed in chapter 2 53-8.1.a in the current attachement j or chapter 2 53-8.4 in the old attachment j under the isg. 4 . This harness bar is only allowed to be used at dmsb-events and only at non fia events. Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have...(choose a part on the right to read more) General FitmentALL
From $387.20
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |